Features

Linde hydrostatic drive

Full belly-pan construction

Low RPM industrial engines

Shock-mounted components, drive/steer axle & tilt cylinders

Linde Truck Control (LTC)

Pressurized hydraulic system

Overhead tilt cylinders

Advantages

No friction brakes, clutch or torque converter; infinite speed control

Belly pan fortifies frame, protects components, acts as skid plate

Maximum RPM is 2,100; 1,050 RPM at 7 MPH

Shock mounting protects components against road shock damage

Top system efficiency via optimized controls

Pressurized hydraulics - no contamination of system, extends life

Overhead cylinders for ideal load control & torque distribution

Unrivaled truck controllability = increased productivity

Decreased maintenance expense, longer truck life

Extended engine life/service intervals, fuel consumption is cut

Less noise, less stress = higher productivity; money saved

Increased operator awareness and care of equipment

Longer maintenance intervals, less downtime

Decreased maintenance cost, longer mast life, increased up-time

Model Designation: H16DT / H18DT / H20DT

Load Capacity: 3,000 lbs. - 4,000 lbs.

Wheelbase: 59.1 in. - 63.0 in. (refer to spec)

Height of Overhead Guard/Cab: 83.6 in.

Length to Forkface: 87.0 in. - 91.5 in. (refer to spec)

Overall Width: 42.8 in. - 45.4 in. (refer to spec)

Transmission oil/filter change - NOT REQUIRED

Tilt cylinder greasing - NOT REQUIRED

Mast mounting greasing - NOT REQUIRED

Engine oil/filter change = every 300/1000 hours

Hydraulic oil/filter change = every 3,000/6,000 hours

Hydrostatic drive deletes TC trani, clutch, differential & drum brakes

Tires are up to three (3) times the life!

Download Brochure